DTMF

Post Reply
User avatar
wb8sqj
Posts: 14
Joined: Mon Feb 27, 2017 7:22 pm

DTMF

Post by wb8sqj »

For some reason I can no longer switch rooms with my FT2D using DTMF.
I reset the openSpot back to factory and down graded the firm ware to 108 still no luck.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5177
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: DTMF

Post by HA2NON »

Please make sure you switch rooms by pressing the "Special command/cross mode private call DTMF code" before entering the room number. It is set to * by default, you can change this on the Settings page, C4FM settings section.

This means if you want to switch to room 99, you have to send *99.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

User avatar
wb8sqj
Posts: 14
Joined: Mon Feb 27, 2017 7:22 pm

Re: DTMF

Post by wb8sqj »

Yes that is how I do it

User avatar
g8koe
Posts: 146
Joined: Sun Sep 04, 2016 8:33 pm

Re: DTMF

Post by g8koe »

Hi,
I have just tested the DTMF with my FT2D and works every time.
My software version is 108.
Check that your Modem is set to C4FM.
I made this mistake with my first test.
Had been using openSPOT in cross mode DMR to C4FM.

73's
Martin
G8KOE

User avatar
wb8sqj
Posts: 14
Joined: Mon Feb 27, 2017 7:22 pm

Re: DTMF

Post by wb8sqj »

Checked modem is set for c4fm also tried it with the FTM-100d still no go

I have 2 openspot's they were both upgraded to the latest beta firmware that's when I
noticed the problem so I down grade back to 108 but no DTMF control.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5177
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: DTMF

Post by HA2NON »

The latest stable and beta fw is 108. I can't reproduce the issue, it works for me all the time with an FT1D, FT2D and FTM100.

Does your call show up in the call log on the status page?
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

User avatar
wb8sqj
Posts: 14
Joined: Mon Feb 27, 2017 7:22 pm

Re: DTMF

Post by wb8sqj »

Yes it does

What I meant to say I downgraded to 101 and had the same problem and then went back to 108.

Thank-you for your time, I may have to just switch rooms with the computer.

Jay
WB8SQJ

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5177
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: DTMF

Post by HA2NON »

Make sure you use DN mode as openSPOT can only decode DTMF on DN calls.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

User avatar
wb8sqj
Posts: 14
Joined: Mon Feb 27, 2017 7:22 pm

Re: DTMF

Post by wb8sqj »

Yes i'am using DM

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5177
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: DTMF

Post by HA2NON »

Can you please show us the openSPOT USB serial console log of a call when you transmit the DTMF?
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply