Disconnect Code

Post Reply
PY4CK
Posts: 59
Joined: Wed Nov 28, 2018 9:33 am

Disconnect Code

Post by PY4CK » Wed Jan 30, 2019 6:12 pm

I was wondering if there is any DTFM code we could send to the OS2 to disconnect it from any reflector we are currently on, either in DSTAR, DMR or YSF mode.

I am talking about a DTMF command I could send via the radio. Does that exist?

Thank you.

PY4CK

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4262
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Disconnect Code

Post by HA2NON » Wed Jan 30, 2019 6:50 pm

The openSPOT2 is designed to be always online and connected. There's no such code. However, if you want, you can create a config profile with the Null connector activated and then switch to that profile using your radio which does basically the same.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

PY4CK
Posts: 59
Joined: Wed Nov 28, 2018 9:33 am

Re: Disconnect Code

Post by PY4CK » Wed Jan 30, 2019 10:57 pm

Alright. Thank you.

Eduardo

Wirezfree
Posts: 11
Joined: Sat Sep 28, 2019 1:22 am

Re: Disconnect Code

Post by Wirezfree » Sun Sep 29, 2019 1:32 pm

HA2NON wrote:
Wed Jan 30, 2019 6:50 pm
The openSPOT2 is designed to be always online and connected. There's no such code. However, if you want, you can create a config profile with the Null connector activated and then switch to that profile using your radio which does basically the same.
Is there any issue with leaving it connected..??

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4262
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Disconnect Code

Post by HA2NON » Sun Sep 29, 2019 2:06 pm

The openSPOT2 is designed to be always online and connected. You can leave it always connected.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Wirezfree
Posts: 11
Joined: Sat Sep 28, 2019 1:22 am

Re: Disconnect Code

Post by Wirezfree » Sun Sep 29, 2019 8:28 pm

HA2NON wrote:
Sun Sep 29, 2019 2:06 pm
The openSPOT2 is designed to be always online and connected. You can leave it always connected.
Many Thanks...

Post Reply