FT2D via OpenSpot 2 Displaying a repeating R>'callsign'

Post Reply
K3LE
Posts: 1
Joined: Thu Feb 07, 2019 1:23 am

FT2D via OpenSpot 2 Displaying a repeating R>'callsign'

Post by K3LE » Thu Feb 07, 2019 5:35 pm

When monitoring the America Link on the YSFReflector, my Yaesu FT2D (via the OpenSpot 2) flashes R>N5YX then flashes the active station's call sign - back and forth perpetually. Looking for information and troubleshooting.

EdAtlanta
Posts: 35
Joined: Wed Dec 21, 2016 12:49 pm

Re: FT2D via OpenSpot 2 Displaying a repeating R>'callsign'

Post by EdAtlanta » Thu Feb 07, 2019 9:34 pm

N5YX is the owner of America Link and that is his call sign.
Ed
KM4STL
3101156

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 3604
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: FT2D via OpenSpot 2 Displaying a repeating R>'callsign'

Post by HA2NON » Fri Feb 08, 2019 7:51 am

Probably the call was routed through a link to another network and that link is associated with N5YX.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Bob_K6UDA
Posts: 99
Joined: Tue Oct 04, 2016 4:46 pm

Re: FT2D via OpenSpot 2 Displaying a repeating R>'callsign'

Post by Bob_K6UDA » Sat Feb 09, 2019 3:51 pm

K3LE wrote:
Thu Feb 07, 2019 5:35 pm
When monitoring the America Link on the YSFReflector, my Yaesu FT2D (via the OpenSpot 2) flashes R>N5YX then flashes the active station's call sign - back and forth perpetually. Looking for information and troubleshooting.
The Room owner has it configured that his callsign flashes along with the current users call sign. Nothing you can do about it.

User avatar
HA5OGR
Posts: 349
Joined: Sat Mar 26, 2016 7:32 pm
Location: Dunavarsány
Contact:

Re: FT2D via OpenSpot 2 Displaying a repeating R>'callsign'

Post by HA5OGR » Mon Feb 11, 2019 6:04 am

Here's how to see on Wires-X software.
Attachments
Wires-X America-Link.jpg
90 America-Link2.jpg
73 de Lajos
Openspot alpha tester
Image

Post Reply