AmericaLink access by DMR transceiver

Post Reply
takagawa@ieee.org
Posts: 1
Joined: Sat Nov 30, 2019 2:55 pm
Location: Tokyo
Contact:

AmericaLink access by DMR transceiver

Post by takagawa@ieee.org » Sat Nov 30, 2019 2:59 pm

Please help me.

I would like to QRV from TYT MD380 DMR transceiver to C4FM's America Link through openSPOT2.
Is the following procedure correct?
Select "Quick setup"
Choose "C4FM"
Set Radio frequency and Radio deviation as "Normal"
Select "YSFReflector"
choose "US AmericaLink" and type "Callsign"
Edit connector as "YSFReflector"
set Modem frequency and choose Modem mode as C4FM"
choose Server as "US AmericaLink(73911)
set Active modem mode as C4FM

Thank you in advance for your help.

LA9ULA
Posts: 18
Joined: Sat Aug 17, 2019 7:14 pm

Re: AmericaLink access by DMR transceiver

Post by LA9ULA » Sat Nov 30, 2019 4:00 pm

In Quick setup your FIRST select the type of RADIO you have.
So not C4FM, but DMR in your case.
THEN you select YSFReflector.

Regards
Bjørnung

Post Reply