OS2 Announcement

Post Reply
PY4CK
Posts: 77
Joined: Wed Nov 28, 2018 9:33 am

OS2 Announcement

Post by PY4CK »

Dear Norbert,

For the first time I am using my OS2 with DMR. Before I only had Fusion and Dstar radios. Will all of them and even with Fusion entering in the Brandmeinster I always had the typical announcement from the OS2 such as "OpenSpot 2 Profile 1 ready", "Openspot 2 connected to...."etc.

However with DMR I do not hear any announcement whatsoever. Am I doing anything wrong or this is not supported while entering direct with DMR Radios? I am using a Radioddity GD-73, but this happens also on a Anytone 578.

I am on Firmware 58 Beta version

Thank you.

PY4CK - Eduardo

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4705
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: OS2 Announcement

Post by HA2NON »

Voice announcements are transmitted to TG9. Make sure you've added TG9 to an RX group list in your transceiver and assign this RX group list to all channels you use for the OS2 in your transceiver.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

PY4CK
Posts: 77
Joined: Wed Nov 28, 2018 9:33 am

Re: OS2 Announcement

Post by PY4CK »

Thank you Norbert.

I will do that and will come to this post to close it.

73 - Eduardo

PY4CK
Posts: 77
Joined: Wed Nov 28, 2018 9:33 am

Re: OS2 Announcement

Post by PY4CK »

TG 9 added.

All works perfectly.

Thank you.

gauripuri
Posts: 1
Joined: Sat Dec 07, 2019 6:53 am

Re: OS2 Announcement

Post by gauripuri »

Thanks for the information that you have shared with us.

tocnaza
Posts: 1
Joined: Mon Dec 16, 2019 12:52 pm

Re: OS2 Announcement

Post by tocnaza »

Great information!

Post Reply