Changing D-Star reflector with DMR radio

Post Reply
ryanfu
Posts: 15
Joined: Fri Apr 26, 2019 2:02 pm

Changing D-Star reflector with DMR radio

Post by ryanfu »

After ordering the OpenSpot3, I have been reading the manual and trying to prepare my code plug. I found this following in the manual:

---------------------------------------------------------------
"You can change servers using a DMR radio with a private call to a special 5 digit long DMR ID which has the following format: server type+number+module.

Server types:

1: REF
2: XRF
3: XLX
4: DCS

Number is the server number. For example, server type 4 and number 01 means DCS001.

Module is the remote module. 00 is module A, 01 is module B, 02 is module C and so on.

The number and module are always 2 digits. Example: starting a private call to ID 10102 will connect to REF001C (server type 1 (REF), number 01 and module 02 which is C)."
--------------------------------------------------------------------------------------------------

It would seem from this information that you can only connect to reflectors 1-99 on DCS, XRF and XLX. However, the reflector numbers go all the way up to 999.

Is this an error in the manual, or an actual limitation of the the OpenSpot3?

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4519
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Changing D-Star reflector with DMR radio

Post by HA2NON »

This is how classic D-STAR DTMF server change works. We'll extend it to 3 digit server numbers.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

ryanfu
Posts: 15
Joined: Fri Apr 26, 2019 2:02 pm

Re: Changing D-Star reflector with DMR radio

Post by ryanfu »

Once extended, will it become a 6 digit code with 3 digits for all reflectors?

ex. 100103 for REF001C

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 4519
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: Changing D-Star reflector with DMR radio

Post by HA2NON »

It will handle multiple ID lengths.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

Post Reply