openSPOT1 DR-1X

Post Reply
wa9vfd
Posts: 2
Joined: Wed Jul 15, 2020 2:17 pm

openSPOT1 DR-1X

Post by wa9vfd »

My openSPOT1 is configured with the reverse TX/RX of our local DR-1X repeater.

When I key up the repeater with a radio the openSPOT hears nothing.

Is this due simply to signal strength or is there something in the C4FM packet that will never allow this to work?

I have tried Full/Half and A-B-C-D-E-F and Half Calibration which resulted in C. I have tried DN wide and DN narrow and VW on the radio. I don't have administrative access to the DR-1X.

User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 5287
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: openSPOT1 DR-1X

Post by HA2NON »

Probably the OS1 does not receive the repeater well enough.
Norbert "Nonoo" Varga, HA2NON
SharkRF Team

wa9vfd
Posts: 2
Joined: Wed Jul 15, 2020 2:17 pm

Re: openSPOT1 DR-1X

Post by wa9vfd »

Thanks. I'll put together a tape measure yagi and see if that works.

Post Reply