You need a manual with a detailed explanation of crossmode.

Post Reply
KASS815
Posts: 5
Joined: Mon Apr 11, 2022 1:26 am

You need a manual with a detailed explanation of crossmode.

Post by KASS815 »

I need a little more detailed explanation of how to use cross mode in the manual.
I can't explain all the radio setup methods, but please explain the basic setup methods easily.
1badsup
Posts: 19
Joined: Fri Mar 20, 2020 4:39 am

Re: You need a manual with a detailed explanation of crossmode.

Post by 1badsup »

It’s actually very simple. Click on Advanced Mode and make sure it’s checked.
1. Click on the Connectors tab.
2. Switch your active connector to the mode you want to cross to. For example, FCS, DMR, D-STAR, etc.
3. Under modem mode, select your transmitting radios mode. If you have a Yaesu radio, you would select C4FM. D-STAR for Icom. DMR for DMR radio.
4. Under server, select your crossmode server. You will see a list of servers based on the mode that you selected under active connector.
User avatar
HA2NON
SharkRF team
SharkRF team
Posts: 6655
Joined: Fri Mar 25, 2016 3:33 pm
Contact:

Re: You need a manual with a detailed explanation of crossmode.

Post by HA2NON »

Or just use the Quick Setup feature on the web interface.
Norbert Varga, HA2NON
SharkRF Team
KASS815
Posts: 5
Joined: Mon Apr 11, 2022 1:26 am

Re: You need a manual with a detailed explanation of crossmode.

Post by KASS815 »

Thank you for answer
WA8YXM
Posts: 6
Joined: Tue Aug 02, 2022 4:35 pm

Re: You need a manual with a detailed explanation of crossmode.

Post by WA8YXM »

I had no problems setting up cross mode. Registering with bandmaster and such but... how to INVOKE it once it's set up.. The blasted owners manual has NOthing on that..

OF course I could waste hours watching You Tube (Why is everybody in love with Videos. What ever happened to the printed page

These are the instructions from a D-Star Radio.> Since I only have D-Star radios I did not bother with other modes.

To connect to a Bandmaster server in the YOUR CALL field send BM#### Example BM3103

Then to connect to a talk group send it's number like 93
To disconnect send 4000

YSF
No need to pre-connect to a serve
To connect to a YSF chat room send YS####

To disconnect use the Unlink from Reflector command (7 spaces and a U)

And it's that easy

Success was mine.
Post Reply