I am having a problem on Bandmeister that I can’t figure out. I do not have this problem on C4FM or DSTAR. I am using a AnyTone 878. Same exact thing happens on my Alinco DMR. I have read through the manual at http://manuals.sharkrf.com/openspot3/en/dmr-usage-notes.html to read about how DMR works and still can’t figure it out.
When I join a talk group and someone begins talking, audio does not come through my radio.
1. I created TG9 with ID of 9 and ensured it is selected.
2. I ensured the frequency send/receive matches http://openspot3.local
3. I have tried deleting the TG9 contact and readded it and then reselected it. (I double-checked to make sure the contact I created was a TG ID and not Private ID
4. If I hold down the PF2 button on my AT878 or Alinco then I can hear the conversation and I can participate but keep having to hold the PF2 to get the audio.
Here are my Channel settings on the radio:
Channel Type: D – Digital
Offset: +0000Hz
Bandwidth: Narrow
Rx Freq: 432.30000
Tx Freq: 432.30000
Talkaround: Off
Color Code: CC1
Timeslot: TS1
Digi Encrypt: Encrypt Off
Rx Group List: TG9 is there
Work Alone: Off
CH Ranging: Off
ARPS Receive: Off
SMS Forbid: Off
DMR Mode: Simplex

Attached is a call log of when this happens and screenshots. I have also tried “Reset all Config Profiles” to start over. What am I doing wrong or what settings do I have wrong and where?