DF1VB
Does the Openspot2 support NAC Wildcard 0xF7E?
And for the Openspot2 i recommend a NAC 0x293 as default because the NAC is a parameter in the systemvalues. And if one is using the Radio in the field via HAM repeater and home via Openspot2 than you do not want to configure the stuff all the time different. NAC 293 is common used in open HAM installations...
HA2NON
Currently the wildcard NAC is not supported.
K5SJW
Does the Openspot2 support NAC Wildcard 0xF7E?
And for the Openspot2 i recommend a NAC 0x293 as default because the NAC is a parameter in the systemvalues. And if one is using the Radio in the field via HAM repeater and home via Openspot2 than you do not want to configure the stuff all the time different. NAC 293 is common used in open HAM installations...
That's what my radio is set at 293 nac... op2 is set to 659 works sometimes but then I get mismatch error at times also
Sent from my SM-G975U using Tapatalk
HA2NON
Please run AutoCal.
K5SJW
Please run AutoCal.
Done...That helps thanks
Wx5ou
Sent from my SM-G975U using Tapatalk
DL5BQ
NAC 0x293/ 695 and autocal made it.
Buckee
still getting the mismatch error even after autocal as suggested
DF1VB
I can confirm that it is working fine now for me.
Thanks for your support and for adding P25 to the openspot2!
73, Jochen df1vb
KK2L
Please advise on what part of the configuration is AutoCal. I am experiencing the mismatch problem from 659 to 1683 that is outlined in this thread.
73
Mark
KK2L
HA2NON
You can find the AutoCal on the Connectors page. It is a special connector.
n9krg
I just picked up an XTS3000 as well. Having the same issue the radio hears the OS2 just fine but OS2 isn't hearing the radio. I have tried all the suggestions in this thread. However... I did notice that the bandwidth on the personalities are all set to 12.5. Isn't P25 wide? Should the the personalities be set for wide 25 and not 12.5?
HA2NON
Please make sure the NAC in your radio matches the openSPOT2's NAC. Note that the openSPOT2's NAC is in decimal (by default it's 659, which is 0x293 in hexadecimal). Set the bandwidth to 12.5KHz in your radio.