Hi, I recently got FT5D and after playing with it for a few weeks I am having some issues when using the radio with my openspot3.

1. When searching for a reflector (for example XLX359) both dstar and fusion reflector will apper with the same name in the search result. I found that the 1st one is dstar and 2nd one is fusion. Does this apply to all reflectors if they have dstar anf fusion version?

2. Once I connect to a dstar reflector and want to save it to one of the shortcut menus, saving is successful, but then when I want to recall (by pressing the coresponding shortcut menu 1-5) it says "not found". I know that save is successfull because I can see it in the radio menu and can remove it. This is only happening with dstar reflectors, fusion ones are working fine. In the web interface log I can also see that my openspot tries to search for LX359 instead of XLX359.

3. With DMR connector when I define my own server and connect to it in wires-x menu I can see the name of the last dmr server but I am definitely connected to my server. Also I cant search for my server as it has no name - just ip address and if i try to search by part of the ip i get no results.

4. Accessing wires-x menu sometimes is not working. Openspot is not receiving anything. If I just move the radio few centimiters it works. I tried with different frequencies, different antennas, different power levels and also different radio (FT-70) and the problem is present in all cases. But when I use my pistar hotspot everything works fine. Also when using the openspot if I slightly change the orientation of the radio I am start getting BER errors and signal level is dropping but this is not constant and can happenes without an obvious reason. When using dstar and dmr openspot is working perfect. When using both fusion radion with pi-star hotspot everything works perfect every time.

5. Sending commands to the openspot using dtmf is annoying. Lets say I want to change the profile, I am connected to a server, pressing ptt in order to send the dtmf command will make my callsign appear on the current server. Someone will see my callsign appering on their radio and may want to reply but at that time openspot profile will be already changed and I will listen on another server.

I hope that all those issues are due to lack of knoledge from my side and someone may suggest how they can be resolved.